Performance

  • 2,200 lbs. capacity (6BWS11)
  • 3,000 lbs. capacity (6BWS15)
  • 4,000 lbs. capacity (6BWS20)
  • 24 Volt electrical system
  • MOSFET transistor control system
  • Separately excited drive motor (SEM)
  • UL-approved model type E
  • On/off key switch
  • Programmable performance
  • Electronic raise and lower controls in operator handle
  • Manual raise and lower controls
  • Class ‘H’ motor insulation
  • Oil-immersed powertrain
Request A Quote
Toyota Industrial Walkie Stacker Image

Body/Exterior Design

  • 32″ to 50″ base leg openings (inside dimensions) in 1″ increments
  • 32.3″ x 9″ battery compartment (6BWS11)
  • 32.3″ x 13.3″ battery compartment (6BWS15.20)
  • 30″ wide ITA Class II fork carriage
  • 42″ fork length
  • 48″ load backrest extension
  • Internal hose reeving
  • Crowned poly drive tire, 10.5″ x 5″
  • Tandem Polyurethane load wheels, 4″ x 2.875″
  • Electronic horn
  • Polyurethane caster wheels, 4″ x 2.5″
  • Base leg with tapered toe box
  • Fully hinged steel service access door
  • Spring-loaded torsion bar suspension with stabilizing casters (6BWS15.20)
  • Wide view 2-stage mast (V)
  • Drive axle mounted string guards
  • Pressure overload valve & lowering control fuses

TOYOTA 360 SUPPORT

 

Toyota_Industrial_Walkie_Stacker_Image_2

Operability & Ergonomics

  • Emergency power disconnect switch
  • Automatic resetting circuit breaker
  • Reverse polarity protection
  • Mechanical drum brake
  • Directional thumb control
  • Safety glass mast guard
  • Direction reverse switch on control handle
  • Control handle with 8.5-degree ergonomic angle
  • Power on self-test with self-diagnostics
Request A Quote

 

Toyota_Industrial_Walkie_Stacker_Image_3

New Equipment Guarantee

In the event you are unhappy with the equipment you purchased from ProLift after one year’s use, we will simply buy it back for the original purchase price less two thirds of our normal rental rate.

Available Options

2" or 3" Side shift Each Way

Easier positioning of loads.

Drive Tire Non-Marking Rubber

Use where rubber markings should not be seen.

Corrosion Conditioning

For damp environments down to 32 degrees F which includes Corrosion Preventative, Sealed Components, Lubrication Package, Plated Components and Electrical Connections.

Battery Discharge Indicator W/ Hour Meter In Combination Gauge W/ Lift Interrupt

The hour meter is replaced with a combination battery discharge indicator and hour meter with lift interrupt.

Equipment Specs

Model Load Capacity* (lbs.) Max travel speed full load (MPH) Max lift speed full load (fpm) Max Gradeability full load (%) Basic right angle stack** (in.)
6BSW11 2,200 2.9 32 10 81
6BWS15 3,000 2.9 32 10 85
6BWS20 4,000 2.6 27 10 88

* Based on 24" load center | ** Add load length and clearance